Electrical 20estimator Projects

opportunity

Electrical engineer needed.

Title: Electrical Engineer Needed for Arduino Based Prototype Build (Enclosure Electronics) Description: We are seeking an experienced electrical engineer to support the design and build of a small prototype system using an Arduino. This is a real world product prototype that combines enclosure based electronics, basic sensing, control logic, and power management. We already have a concept and a rough functional outline. Your role is to turn this into a practical, reliable build with clear documentation that we can iterate on. Scope of work (high level): Review our concept and propose a suitable architecture (Arduino) Design the electrical system and component selection (BOM) Power design (Preferably hard wired, not battery) Integrate and control multiple modules (drivers, sensors, indicators, switches, etc.) Produce wiring diagrams / schematics and a clean prototype wiring plan Firmware support (basic control code, libraries, reliability, fail safes) Guidance on enclosure integration (connectors, cable routing, heat considerations) Debugging support and iteration during the prototype stage Deliverables: Simple system overview and recommended approach Schematics/wiring diagrams (PDF + source files if possible) Firmware/code repository or zipped project folder with notes Build and test notes so we can reproduce the prototype Required experience: Strong electronics and microcontroller experience (Arduino, ESP32, STM32, etc.) Power regulation and protection (fusing, reverse polarity, transient protection) Experience with real world prototype builds (not just simulations) Comfortable producing clear documentation and diagrams Nice to have: Experience with productisation (DFM, connector selection, serviceability) EMC awareness and best practice grounding/wiring for noise reduction Experience designing around heat management and compact enclosures

I need an electrical drawing in 3 hours

I am seeking a proficient electrical engineer or designer to produce a detailed electrical drawing within a stringent timeframe of three hours. This drawing must conform to industry standards and accurately depict the electrical layout, encompassing power distribution, lighting fixtures, and essential circuitry. The ideal candidate will exhibit a robust comprehension of electrical schematics and demonstrate expertise in relevant design software. A keen eye for detail and commitment to timeliness are crucial, as this project requires prompt execution. Bids should include examples of previously completed work.

Complete our Constructionline profile for electrical contractor

We are a UK electrical contractor (Glasgow Electrical Testing Ltd) with an active Constructionline membership that has not been fully completed. We require an experienced freelancer who has previously completed Constructionline / CHAS / SSIP profiles for contractors. We will provide all required documents including insurance certificates, NAPIT registration, company details, policies, RAMS and example certification. The task is to log into our Constructionline portal and fully complete the profile, upload the correct evidence, and ensure we achieve full compliance status and visible accreditation badges. This is not a general admin task. We are specifically looking for someone familiar with Constructionline evidence requirements and contractor compliance portals. Please only apply if you have completed Constructionline profiles before.

Automation

We are seeking a skilled freelancer to assist in the design and automation of electrical components for an innovative project. The ideal candidate will possess a strong background in electrical engineering and experience in automating processes to enhance efficiency and functionality. Responsibilities will include creating detailed schematics, selecting appropriate materials, and implementing automation systems that integrate seamlessly with existing components. A keen eye for detail and the ability to troubleshoot complex issues is essential. Join us in revolutionizing our approach to electrical design and automation.

opportunity

MEP drawings

I am seeking a proficient designer to create detailed MEP (Mechanical, Electrical, and Plumbing) diagrams for my upcoming book. Each chapter requires precise 2D illustrations that accurately depict the discussed systems, complemented by schematic representations to facilitate understanding. The final illustrations must be clear, professional, and tailored to enhance the accompanying text. I have provided the manuscript for context. Your artistic expertise is crucial in transforming the content into engaging visuals, ensuring clarity and captivating the readers' attention. All drawings and schematics must adhere to British Standard (BS 8888).

Phone sales

We are seeking a skilled telemarketer to conduct phone sales and promote our electrical contracting services. The role involves utilizing our existing data, as well as sourcing additional leads independently, to effectively reach potential clients. Your primary objective will be to establish and cultivate a robust sales pipeline, fostering relationships and generating interest in our offerings. If you possess excellent communication skills, a persuasive demeanor, and a proactive approach to lead generation, we invite you to bid on this project and contribute to our growth.

urgent

Google addwords ppc set up

I have 2 web sites as below. www.leedsstovecentre.co.uk We supply and install woodburning and gas stoves within a 50 miles radius of Leeds i am wanting more leads with in this radios for keywords and also to come up for stove brands that i deal with. www.stanningleyfiresides.co.uk Similar to above but supply gas and electric fires and fireplaces within a 40 mile radius.

PDF / Digital Forms Developer (Site Survey Solution vs)

We are looking for an experienced PDF forms / digital forms developer to create a smart, scalable digital version of our existing Site Survey sheet (currently a single-page PDF). At present, surveys are printed and completed by hand. We want a professional digital solution that allows engineers and office staff to type directly into the form, add as many pages as required, and save everything as one final PDF file. The solution must work on both laptops and iPads (including on-site use), without requiring specialist software or complex setup. Some sites require 2 pages, while others require 20+ pages, so flexibility and automation are essential. ⸻ Key Requirements The solution must: • Be based on our existing site survey layout • Allow users to type information directly into the form • Work reliably on laptops and iPads • Support adding and removing pages dynamically • Save as one single PDF file, regardless of page count • Automatically update “Page X of Y” in the bottom-right corner • Automatically total data across all pages on the final page: • Last 4 columns to be auto-calculated • First 3 columns are numeric values • Final column contains SP or TP • The final page should display totals calculated from all previous pages • Be intuitive and easy to use for non-technical staff ⸻ Technical Expectations We are open to different technical approaches, but the solution must be fully usable on both laptop and iPad. Relevant experience may include: • Advanced fillable PDFs (including PDF JavaScript) • Cross-platform form solutions (desktop & tablet) • Automated calculations and page numbering • Digital inspection or survey forms Experience with construction, electrical, or compliance documentation is a strong advantage. ⸻ Deliverables • Fully functional multi-page digital site survey • Works on laptop and iPad • Auto page numbering and auto totals • Saved as one multi-page PDF file • Clear instructions for staff use

Equipment Host minder in Indonesia

We are looking for reliable Equipment Hosts across Indonesia to support our compliance advertising monitoring network. This is a simple, low-maintenance role that can be done from home or a business location. (Host need to be located in Indonesia What You’ll Do • Provide a safe indoor spot for a small device • Keep it powered and connected to the internet • Perform very basic checks if needed (restart, reconnect cables, etc.) • Inform us if you notice any issues What We Provide • All equipment and setup instructions • Remote management and technical support • Fast replacement if there is a device issue • Monthly compensation for hosting Requirements • Reliable electricity and Internet • Small indoor space (desk/shelf/cabinet) • Based in Singapore • Responsible and reachable Perfect for: home users, offices, retailers, co-working spaces, IT enthusiasts — anyone who wants easy passive income with minimal effort. ✅ If you’re interested, please complete our short application form: https://forms.gle/hNBShaVxSuC6TVq9A After applying, we’ll contact you and can provide more detailed information.

Goodnotes templates

Hi all I’m looking for a custom GoodNotes template designed specifically for my role as Technical BDM at Guardian Electrical. To be used on an iPad pro with pencil I need a meeting notes template that ensures I consistently capture all critical information on every site/customer visit — and that nothing gets missed. ⭐ Template Requirements (Must Include) Header Section • Customer Name: __________________________ • Site Address: ____________________________ • Date: ____________ • Contact Name + Number: __________________ • Meeting Type: (Site Visit / Survey / Quote / Follow-up) ⸻ ✅ Site / Technical Checklist Section (Yes/No + Notes) Please format this section as a structured checklist with Yes / No toggles (or tick boxes) plus space for quick notes where required. 1) Asbestos • ☐ Yes ☐ No • If Yes → additional notes box appears (or is included under it) 2) Access for Site (Arrival) • Notes box included (parking / permits / security / entry info) 3) Isolation of Equipment • Notes box included (who isolates / when / responsibility / restrictions) 4) High Level Equipment • ☐ Yes ☐ No • If Yes → “Type of access equipment required” field: • ⸻ 5) Busbars • ☐ Yes ☐ No 6) London (or similar requirements) • ☐ Yes ☐ No 7) Lodge • ☐ Yes ☐ No ⸻ ✅ Equipment / Circuit Breakdown (Yes/No + Quantity) Please include a grid/table layout with Yes / No + “How many?” for each: • SP Circuits (SP ccts) ☐ Yes ☐ No | Qty: ____ • TP Circuits (TP ccts) ☐ Yes ☐ No | Qty: ____ • SP DBs ☐ Yes ☐ No | Qty: ____ • TP DBs ☐ Yes ☐ No | Qty: ____ • Panelboards ☐ Yes ☐ No | Qty: ____ • BB ☐ Yes ☐ No | Qty: ____ • EVSE ☐ Yes ☐ No | Qty: ____ • EET ☐ Yes ☐ No | Qty: ____ ⸻ ✅ Documentation / Drawings Section • Comprehensive Drawings • ☐ Yes ☐ No ☐ Other (specify): ________________ ⸻ ✅ Risk / Compliance Section • Panel Risk Assessments • ☐ Yes ☐ No ⸻ ✅ Additional Scope / Notes Sections Please include note-taking spaces for: Remedials • Large notes box EML • ☐ Yes ☐ No • Notes box (optional) ⸻